The shamt field in the MIPS instruction is use for which instruction?
A. XOR
B. SLLI
C. Branch
D. SRL
E. NOR
F. SLL
G. SLT
Answer:
D. SRL
F. SLL
Learn More :
Assembly
- The 64-bit ARM v8 is an extension of the design of the 32-bit ARM v7.
- Early microprocessors which disappeared from the market did so because
- The market in which Intel processors do not do well is
- The reason the "ugly" Intel architecture has survived over the years is that
- Which processor uses instructions which are of different lengths
- The Intel instruction set has special instructions for string move and string compare
- An addressing scheme where the address is a base register plus 2^n times an index (where n is specified in 2 or 3 bits of the instruction) is called
- Registers in the current Intel processors are the same length
- In general, Intel's arithmetic instructions
- Intel's widest register is ____ bits wide.
- In the 1970s, a company named Zilog produced a better chip than Intel but used intel's architecture. More recently, what company has been doing this?
- A large number (more than 200) instructions were added to the Intel instruction set
- With the arrival of multimedia applications in the late 1990s, Intel introduced
- Intel's first 32-bit processor, the 80386 appeared the same year as the MIPS and ARM processors. However
- When floating point operations were introduced in the Intel processor line,
- Intel's 1978 microprocessor, the 8086 had a 16-bit architecture with
- In general, a more complex instruction set means
- ARMS processors can load blocks of memory into multiple registers with one instruction
- In the ARM 12-bit immediate field, the eight least significant bits are zero-extended to a 32-bit value, then rotated right the number of bits specified in the first four bits of the field multiplied by two. This allows
- Each ARM instruction begins with _____
- The ARM processor uses a status word of four bits: negative, zero, carry and overflow. What is this status word used for?
- How many extra instructions does the ARM instruction set require to conditionally skip a single instruction?
- The MIPS and ARM instruction sets differ widely on how they perform
- The MIPS instruction set has many more data addressing modes than the ARM set.
- Which operation is unsupported in the ARM-7 instruction set?
If the answers is incorrect or not given, you can answer the above question in the comment box. If the answers is incorrect or not given, you can answer the above question in the comment box.